In the carton gluing process, the uniformity of the glue line in the carton folding and gluing machine directly affects the product appearance and bonding stability, and is also a frequently encountered problem in production. Too wide a glue line can lead to cardboard warping, while too narrow a glue line results in insufficient bonding strength. How can precise glue line control be achieved through simple and effective practical adjustments? The following three practical points are worth noting.
Precise Adjustment of the Coating Nozzle Gap
The distance between the carton folding and gluing machine's applicator nozzle and the cardboard needs to be set according to the required glue line width. When adjusting, a copper shim of matching thickness can be placed under the applicator nozzle. After tightening the positioning screws, remove the copper shim to ensure a uniform gap; if the glue line is wider on one side, fine-tune the adjustment screw on the side of the applicator nozzle, adjusting by no more than 0.05mm each time, and test the adhesion of two pieces before gradually calibrating.
Stable Glue Supply Pressure and Flow Rate
Pressure fluctuations in the glue supply pump of the carton folding and gluing machine are the main cause of uneven glue lines. In practice, the glue supply pressure should be stabilized at 0.3-0.4MPa, monitored in real time through a pressure gauge. If the pressure fluctuation exceeds 0.03MPa, the glue pump filter should be checked for blockage, and impurities should be cleaned promptly to avoid interruption of glue supply. At the same time, regularly check the glue supply pipeline for aging and leakage, and replace damaged sealing rings to ensure smooth and unobstructed glue delivery.
Keep the Coating Nozzle Clean
During production breaks, wipe the glue outlet of the coating nozzle with a high-temperature cleaning agent to remove residual glue stains. This prevents the glue stains from solidifying and blocking the glue outlet, leading to "broken" glue lines. It is recommended to periodically stop the machine to clean the coating nozzle. When cleaning, avoid using hard tools to scrape, as this may damage the flatness of the glue outlet and affect subsequent glue line uniformity.






